• SAE AMS6350M

SAE AMS6350M

  • Steel Sheet, Strip, and Plate, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
  • standard by SAE International, 09/19/2011
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.

These products have been used typically for use where welding and moderate tensile properties are required, but usage is not limited to such applications. Sheet and strip are extensively used where minimum tensile strength of 180 ksi (1241 MPa) is required in sections up to 0.125 inch (3.18 mm) in nominal thickness and proportionately lower strength is required in heavier thicknesses.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS-QQ-A-367B

SAE AMS-QQ-A-367B

Aluminum Alloy Forgings..

$41.00 $81.00

SAE J 1803

SAE J 1803

Seat Belt Restraint Systems Hardware-Glossary of Terms..

$41.00 $81.00

SAE J183_201104

SAE J183_201104

Engine Oil Performance and Engine Service Classification (Other than "Energy Conserving")..

$41.00 $81.00

SAE AMS4221D

SAE AMS4221D

Aluminum Alloy, Plate 4.4Cu - 1.5Mg - 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved, an..

$41.00 $81.00