• SAE AMS6352J

SAE AMS6352J

  • Steel Sheet, Strip, and Plate, 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135)
  • standard by SAE International, 12/18/2009
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.

These products have been used typically for heat treated parts and structures that may require welding during fabrication, but usage is not limited to such applications. It may be through-hardened to a minimum tensile strength of 180 ksi (1241 MPa) in sections 0.125 inch (3.18 mm) and under in nominal thickness and proportionately lower strength in heavier section thicknesses.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMSR25988A

SAE AMSR25988A

Rubber, Fluorosilicone Elastomer, Oil-and-Fuel-Resistant, Sheets, Strips, Molded Parts, and Extruded..

$41.00 $81.00

SAE AS5780C

SAE AS5780C

Specification for Aero and Aero-Derived Gas Turbine Engine Lubricants..

$41.00 $81.00

SAE AMS5315E

SAE AMS5315E

Ductile (Nodular) Iron Castings, Sand 60000 psi (415 MPa) Tensile Strength Ferritize Annealed (Stabi..

$41.00 $81.00

SAE AMS5316E

SAE AMS5316E

Ductile (Nodular) Iron Castings, Sand 80,000 psi (550 MPa) Tensile Strength As Cast (Stabilized: Aug..

$41.00 $81.00