• SAE AMS6356G

SAE AMS6356G

  • Steel, Sheet, Strip, and Plate, 0.95Cr - 0.20Mo - (0.30 - 0.35C) (4132)
  • standard by SAE International, 05/17/2011
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.

These welding products have been used typically for heat treated parts and structures that may require welding during fabrication, but usage is not limited to such applications. Product, 0.375 inch (9.52 mm) and under in nominal thickness, may be through-hardened to a minimum tensile strength of 180 ksi (1241 MPa) and proportionately lower strength in heavier section thicknesses.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4484L

SAE AMS4484L

Magnesium Alloy Castings, Permanent Mold 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Tr..

$41.00 $81.00

SAE <PDF>AMS5347BAMS4483E

SAE <PDF>AMS5347BAMS4483E

Magnesium Alloy Castings, Permanent Mold 10Al (AM100A-T6) Solution and Precipitation Heat Treated..

$99.00 $197.00

SAE AMS2530A

SAE AMS2530A

Tungsten Disulfide Coating, Thin Lubricating Film, Binder-Less Impingement Applied..

$41.00 $81.00

SAE ARP499C

SAE ARP499C

Passageway Door Operation (Stabilized: Sep 2013)..

$41.00 $81.00