• SAE AMS6371K

SAE AMS6371K

  • Steel, Mechanical Tubing 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
  • standard by SAE International, 02/26/2013
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of mechanical tubing.

This tubing has been used typically for parts, 0.375 inch (9.52 mm) and under in nominal thickness at time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 40 HRC when properly hardened and tempered and for parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2759/2G

SAE AMS2759/2G

Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher..

$41.00 $81.00

SAE AMS2759/3G

SAE AMS2759/3G

Heat Treatment Precipitation-Hardening Corrosion-Resistant, Maraging, and Secondary Hardening Steel ..

$41.00 $81.00

SAE AMS2759/4D

SAE AMS2759/4D

Heat Treatment Austenitic Corrosion-Resistant Steel Parts..

$41.00 $81.00

SAE AMS2759/5E

SAE AMS2759/5E

Heat Treatment Martensitic Corrosion-Resistant Steel Parts..

$41.00 $81.00