• SAE AMS6372L

SAE AMS6372L

  • Steel Tubing, Mechanical, 0.95Cr 0.20Mo (0.33-0.38C) (SAE 4135)
  • standard by SAE International, 03/23/2009
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of mechanical tubing.

This tubing has been used typically for parts, 0.75 inch (19 mm) and under in section thickness at time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 40 HRC when properly hardened and tempered and for parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS6947A

SAE AMS6947A

Titanium Alloy, Bars, Wire, Forgings, Rings, and Drawn Shapes 4Al - 2.5V -1.5 Fe Annealed, Heat Trea..

$41.00 $81.00

SAE AMS6948A

SAE AMS6948A

Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 4Al - 2.5V -1.5 Fe Annealed..

$41.00 $81.00

SAE ARP1796B

SAE ARP1796B

Engine Bleed Air Systems for Aircraft..

$41.00 $81.00

SAE ARP1816D

SAE ARP1816D

Charger for Battery Powered Ground Support Equipment..

$41.00 $81.00