• SAE AMS6372M

SAE AMS6372M

  • Steel, Mechanical Tubing 0.95Cr – 0.20Mo (0.33 – 0.38C) (SAE 4135)
  • standard by SAE International, 02/25/2013
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of mechanical tubing.

This tubing has been used typically for parts, 0.75 inch (19 mm) and under in nominal wall thickness at time of heat treatment requiring a through-hardening steel capable of developing hardness as high as 40 HRC when properly hardened and tempered and for parts of greater wall thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4086N

SAE AMS4086N

Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution He..

$41.00 $81.00

SAE AMS3376C

SAE AMS3376C

Sealing Compound, Non-Curing, Fluorosilicone Groove Injection Temperature and Fuel Resistant..

$41.00 $81.00

SAE J1775_201505

SAE J1775_201505

Bleed-Air Pneumatic Systems for Gas Turbine Equipped Marine and Amphibious Craft..

$41.00 $81.00

SAE J1939DA_201505

SAE J1939DA_201505

J1939 Digital Annex..

$82.00 $163.00