• SAE AMS6381H

SAE AMS6381H

  • Steel, Mechanical Tubing 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140)
  • standard by SAE International, 02/26/2013
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of mechanical tubing.

This tubing has been used typically for parts, 0.500 inch (12.70 mm) and under in section thickness at the time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 50 HRC when properly hardened and tempered and also parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2458_201207

SAE J2458_201207

Exhaust Brake Dynamometer Test and Capability Rating Procedure (Stabilized: Jul 2012)..

$41.00 $81.00

SAE J2743_201207

SAE J2743_201207

Air Compressor Size Rating Recommended Practice - Truck and Bus..

$41.00 $81.00

SAE J923_201207

SAE J923_201207

Nomenclature and Terminology for Truck and Bus Drive Axles (Stabilized: Jul 2012)..

$41.00 $81.00

SAE J617_201205

SAE J617_201205

Engine Flywheel Housing and Mating Transmission Housing Flanges (Stabilized: May 2012)..

$41.00 $81.00