• SAE AMS6395G

SAE AMS6395G

  • Steel Sheet, Strip, and Plate, 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140)
  • standard by SAE International, 10/21/2011
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.

These products have been used typically for heat treated parts, 0.875 inch (22.22 mm) and under in section thickness at time of heat treatment, requiring through-hardening to a minimum tensile strength of 180 ksi (1241 MPa) and proportionately lower strength in heavier thicknesses, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4599

SAE AMS4599

Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution and Precipitation ..

$41.00 $81.00

SAE AMS4600

SAE AMS4600

Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution Heat Treated, Cold..

$41.00 $81.00

SAE AMS4613

SAE AMS4613

Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution Heat Treated, Cold..

$41.00 $81.00

SAE AMS4617

SAE AMS4617

Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, 7075-T73511, 7075-T73510) Solut..

$41.00 $81.00