• SAE AMS6413L

SAE AMS6413L

  • Steel, Mechanical Tubing, 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (SAE 4337)
  • standard by SAE International, 04/19/2011
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of mechanical tubing.

This product has been used typically for parts, 0.875 inch (22.22 mm) and under in section thickness at time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 50 HRC when properly hardened and tempered and also parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS6169

SAE AS6169

AS6169: Interface Standard, Airborne EO/IR Systems, Mechanical..

$41.00 $81.00

SAE AIR1813B

SAE AIR1813B

The Coanda/Refraction Concept for Gas Turbine Engine Test Cell Noise Suppression (Stabilized: Feb 20..

$41.00 $81.00

SAE AMS2401J

SAE AMS2401J

Plating, Cadmium Low Hydrogen Content Deposit..

$41.00 $81.00

SAE AMS5804H

SAE AMS5804H

Steel, Corrosion and Heat-Resistant, Welding Wire 15Cr - 25.5Ni - 1.3Mo - 2.2Ti - 0.006B - 0.30V..

$41.00 $81.00