• SAE AMS6415T

SAE AMS6415T

  • Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340)
  • standard by SAE International, 07/02/2012
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

These products have been used typically for parts, 3.5 inches (89 mm) and under in nominal thickness at time of heat treatment, requiring a through-hardening steel capable of developing a minimum hardness of 40 HRC when properly hardened and tempered and also for parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.

Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; SAE ARP 1110 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS3217/1B

SAE AMS3217/1B

Test Slabs, Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile, 65 - 75..

$41.00 $81.00

SAE AMS3020A

SAE AMS3020A

Oil, Reference, for ¿¿¿L¿¿¿ Stock Rubber Testing..

$41.00 $81.00

SAE J2966_201309

SAE J2966_201309

Guidelines for Aerodynamic Assessment of Medium and Heavy Commercial Ground Vehicles Using Computati..

$41.00 $81.00

SAE AMS4295D

SAE AMS4295D

Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr (2219 - O, F, T31, T351, T3..

$41.00 $81.00