• SAE AMS6417G

SAE AMS6417G

  • Steel, Bars, Forgings, and Tubing, 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.38 - 0.43C), Consumable Electrode Vacuum Remelted
  • standard by SAE International, 05/24/2011
  • Category: SAE

$81.00 $41.00

This specification covers a premium aircraft quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

These products have been used typically for parts 3.5 inches (89 mm) and under in nominal cross-sectional thickness, requiring a through-hardening steel capable of developing a minimum hardness of 52 HRC, the parts being subject to rigid magnetic particle inspection standards, but usage is not limited to such applications. Except for carbon content and tensile properties thsi material sis similar to AMS 6419.

Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; ARP 1110 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2403DA_201411

SAE J2403DA_201411

Digital Annex of Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature..

$41.00 $81.00

SAE TSB002_201411

SAE TSB002_201411

Preparation of SAE Technical Reports..

$41.00 $81.00

SAE TSB004_201411

SAE TSB004_201411

Technical Committee Guidelines..

$41.00 $81.00

SAE AS14241

SAE AS14241

CLAMP, LOOP TYPE, CUSHIONED SUPPORT, METRIC..

$41.00 $81.00