• SAE AMS6419G

SAE AMS6419G

  • Steel, Bars, Forgings, and Tubing, 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.45C), Consumable Electrode Vacuum Remelted
  • standard by SAE International, 05/24/2011
  • Category: SAE

$81.00 $41.00

This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

These products have been used typically for parts, 3.5 inches (89 mm) and under in nominal section thickness, requiring a through-hardening steel capable of developing a minimum hardness of 53 HRC, the parts being subject to very rigid magnetic particle inspection standards, but usage is not limited to such applications. Except for carbon content and tensile properties this material is similar to AMS 6417.

Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; ARP 1110 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS85028/4A

SAE AS85028/4A

CONNECTOR, ELECTRIC, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, SEALING PL..

$41.00 $81.00

SAE AS85028/5A

SAE AS85028/5A

CONNECTOR, ELECTRIC, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, WIRE SEAL,..

$41.00 $81.00

SAE J1982_201605

SAE J1982_201605

Nomenclature - Wheels for Passenger Cars, Light Trucks, and Multipurpose Vehicles..

$41.00 $81.00

SAE AIR1794A

SAE AIR1794A

Ball-On-Cylinder (BOC) Aircraft Turbine Fuel Lubricity Tester..

$41.00 $81.00