• SAE AMS6421F

SAE AMS6421F

  • Steel, Bars, Forgings, and Tubing, 0.80Cr - 0.85Ni - 0.20Mo - 0.003B (0.35 - 0.40C) (Modified 98B37)
  • standard by SAE International, 05/24/2011
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

These products have been used typically for parts, 0.875 in. (22.22 mm) and under in section thickness at time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 50 HRC when properly hardened and tempered, and also for parts of greater thickness requiring proportionately lower hardness, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS4678D

SAE AS4678D

NUT, BULKHEAD, SHORT FLARELESS..

$41.00 $81.00

SAE AS4689D

SAE AS4689D

FITTING, TEE, REDUCER, BULKHEAD ON RUN, FLARELESS AND SHORT FLARELESS..

$41.00 $81.00

SAE AS4691G

SAE AS4691G

FITTING ASSEMBLY, TEE, FLARELESS AND SHORT FLARELESS, REDUCER, RETAINED NUT ON RUN..

$41.00 $81.00

SAE AS5178B

SAE AS5178B

NUT, FITTING, BULKHEAD..

$41.00 $81.00