• SAE AMS6422J

SAE AMS6422J

  • Steel, Bars, Forgings, and Tubing, 0.80Cr - 0.85Ni - 0.20Mo - 0.003B - 0.04V (0.38 - 0.43C) (Modified 98BV40)
  • standard by SAE International, 05/24/2011
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

These products have been used typically for parts, 3.5 inches (89 mm) and under in nominal thickness at time of heat treatment requiring a through-hardening steel capable of developing a minimum hardness of 30 HRC when properly hardened and tempered and also for parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS29513C

SAE AS29513C

PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT, "O" RING..

$41.00 $81.00

SAE AS4370E

SAE AS4370E

NUT, FITTING, RETAINED..

$41.00 $81.00

SAE AS5728B

SAE AS5728B

O-RING MOLDED FROM AMS7268 (SILICONE) MATERIAL..

$41.00 $81.00

SAE AS6058A

SAE AS6058A

PACKING, PREFORMED, O-RING MOLDED FROM PERFLUOROETHER, FFO MATERIAL..

$41.00 $81.00