• SAE AMS6424E

SAE AMS6424E

  • Steel Bars, Forgings, and Tubing 0.80Cr 1.8Ni 0.25Mo (0.49-0.55C)
  • standard by SAE International, 02/01/2008
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

These products have been used primarily for parts 3.5 in. (90 mm) and under in nominal section-thickness at time of heat treatment requiring a through-hardening steel capable of developing hardness as high as 40 HRC and also parts with thicker cross-section which require proportionately lower hardness, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J738_201401

SAE J738_201401

Cutting Edge - Double Bevel Cross Sections..

$41.00 $81.00

SAE AS5419/2

SAE AS5419/2

WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, ABRASION RESISTANT, EXTRUDED PTFE NICKEL/CHROMIUM (KP);..

$41.00 $81.00

SAE AS5419/3

SAE AS5419/3

WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, EXTRUDED TFE NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/ MAN..

$41.00 $81.00

SAE AS5419/4

SAE AS5419/4

WIRE, THERMOCOUPLE, CROSSLINKED POLYALKENE INSULATED NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE..

$41.00 $81.00