• SAE AMS6424F

SAE AMS6424F

  • Steel Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C)
  • standard by SAE International, 11/05/2012
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

These products have been used primarily for parts 3.5 in. (90 mm) and under in nominal section-thickness at time of heat treatment requiring a through-hardening steel capable of developing hardness as high as 40 HRC and also parts with thicker cross-section which require proportionately lower hardness, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AIR5396A

SAE AIR5396A

Characterizations of Aircraft Icing Conditions..

$41.00 $81.00

SAE AIR6326

SAE AIR6326

Aircraft Electrical Power Systems Modeling and Simulation Definitions..

$41.00 $81.00

SAE J2271M_201508

SAE J2271M_201508

Ship Systems and Equipment - Part Standard for Studs - Continuous and Double End (Metric) (Stabilize..

$41.00 $81.00

SAE J2418_201508

SAE J2418_201508

Occupant Restraint Dynamic System Evaluation - Frontal Impact Heavy Trucks..

$41.00 $81.00