SAE AMS6425C
- Steel, Bars, Forgings, and Tubing, 1.4Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28C), Consumable Electrode Vacuum Melted
- standard by SAE International, 05/24/2011
- Category: SAE
$81.00
$41.00
This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
These products have been used typically for parts requiring a through-hardening steel capable of developing a combination of high tensile strength, ductility, and fracture toughness, but usage is not limited to such applications.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; ARP1110 recommends practices to minimize such conditions.
These products have been used typically for parts requiring a through-hardening steel capable of developing a combination of high tensile strength, ductility, and fracture toughness, but usage is not limited to such applications.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; ARP1110 recommends practices to minimize such conditions.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
