• SAE AMS6427L

SAE AMS6427L

  • Steel Bars, Forgings, and Tubing, 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.25 - 0.33C) (4330 Mod)
  • standard by SAE International, 12/21/2012
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

These products have been used typically for parts requiring a combination of high tensile strength and good ductility with relatively-high impact strength and hardness, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment. SAE ARP 1110 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS3303L

SAE AMS3303L

Elastomer: Silicone, Rubber (MQ/VMQ) General Purpose 55 - 65 Durometer Type A Hardness..

$41.00 $81.00

SAE AMS3327E

SAE AMS3327E

Elastomer: Fluorosilicone Rubber (FVMQ) High Temperature, High Modulus, Fuel and Oil Resistant 70 - ..

$41.00 $81.00

SAE AS4223B

SAE AS4223B

FITTING, UNION, BULKHEAD BEAM SEAL..

$41.00 $81.00

SAE AS117J

SAE AS117J

Hose Assembly, PTFE, Cres Reinforced, 3000 psi, 400 degrees F, Straight to 90 degrees, Flareless, Li..

$41.00 $81.00