• SAE AMS6428J

SAE AMS6428J

  • Steel, Bars, Forgings, and Tubing 0.80Cr-1.8Ni-0.35Mo-0.20V(0.32-0.38C) (4335 Mod)
  • standard by SAE International, 05/17/2010
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

These products have been used typically for heat treated parts up to 4 inches (1102 mm) round or equivalent cross-section which require through hardening to tensile strength not lower than 180 ksi (1241 MPa) and which may require welding after heat treatment, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS150201A

SAE AS150201A

PIN-LOCK, STEEL (Stabilized: Feb 2014)..

$41.00 $81.00

SAE AS3178A

SAE AS3178A

BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140..

$41.00 $81.00

SAE AS85421/2B

SAE AS85421/2B

FITTING END, STANDARD DIMENSIONS FOR, BULKHEAD, DYNAMIC BEAM SEAL, MALE..

$41.00 $81.00

SAE AS9230A

SAE AS9230A

BRACKET, ANGLE, 90¿¿ .190 X .312 BOLT (Stabilized: Feb 2014)..

$41.00 $81.00