• SAE AMS6433F

SAE AMS6433F

  • Steel, Sheet, Strip, and Plate 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod)
  • standard by SAE International, 05/17/2010
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low alloy steel in the form of sheet, strip, and plate.

These products have been used typically for heat treated parts, which may be welded during fabrication, requiring through-hardening to high strength levels, and which may be used at operational stress levels approaching the yield strength. Steel may be notch sensitive when heat treated above 200 ksi (1379 MPa) yield strength; consequently, caution should be exercised in this respect.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J850_200911

SAE J850_200911

Fixed Rigid Barrier Collision Tests..

$41.00 $81.00

SAE J855_200911

SAE J855_200911

Test Method of Stretch and Set of Textiles and Plastics..

$41.00 $81.00

SAE ARP5598

SAE ARP5598

Unauthorized Laser Illuminations: Pilot Operational Procedures..

$41.00 $81.00

SAE AMS4182G

SAE AMS4182G

Aluminum Alloy, Wire, 5.0Mg - 0.12Mn - 0.12Cr (5056-O), Annealed..

$41.00 $81.00