• SAE AMS6462J

SAE AMS6462J

  • Steel, Welding Wire 0.95Cr - 0.20V (0.28 - 0.33C) (SAE 6130)
  • standard by SAE International, 04/09/2012
  • Category: SAE

$81.00 $41.00

This specification has been declared “NONCURRENT” by the Aerospace Materials Division, SAE, as of March, 2008. It is recommended, therefore, that this specification not be specified for new designs. “NONCURRENT” refers to those specifications which have previously been widely used and which may be required for production or processing of existing designs in the future. The Aerospace Materials Division, however, does not recommend these specifications for future use in new designs.

This specification covers a low-alloy steel in the form of welding wire.

This wire has been used typically as filler metal for gas-tungsten-arc and gas-metal arc welding of low-alloy steels capable of heat treatment to a minimum tensile strength of 150 ksi (1034 MPa), but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5517L

SAE AMS5517L

Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 125 ksi (862 MPa) Te..

$41.00 $81.00

SAE AMSQQA225/6A

SAE AMSQQA225/6A

Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished..

$41.00 $81.00

SAE AMS4120R

SAE AMS4120R

Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution ..

$41.00 $81.00

SAE AMSQQA225/4

SAE AMSQQA225/4

Aluminum Alloy, 2014, Bar, Rod, Wire and Special Shapes, Rolled, Drawn, or Cold Finished..

$41.00 $81.00