• SAE AMS6470M

SAE AMS6470M

  • Steel, Nitriding, Bars, Forgings, and Tubing 1.6 Cr – 0.35Mo – 1.13Al (0.38 – 0.43C) (135 Mod)
  • standard by SAE International, 05/17/2010
  • Category: SAE

$81.00 $41.00

This specification covers a nitriding grade of aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

These products have been used typically for nitrided parts requiring high surface hardness, resistance to heat, and less distortion than parts fabricated from steel requiring quenching to case harden, but usage is not limited to such applications. this stell may be case hardened in dissociated ammonia gas to provide a minumum case hardness of 900 HV.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2451/11B

SAE AMS2451/11B

Plating, Brush, Cobalt..

$41.00 $81.00

SAE AMS3331C

SAE AMS3331C

Elastomer: Fluorosilicone Rubber (FVMQ) Fuel and Oil Resistant 65 ¿¿¿ 75 Shore A Hardness For Produc..

$41.00 $81.00

SAE AMS3382D

SAE AMS3382D

Elastomer: Tetrafluoroethylene/Propylene (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 75 to 90..

$41.00 $81.00

SAE AMS6951

SAE AMS6951

Titanium Alloy, Sheet 5Al - 4V - 0.75Mo - 0.5Fe Annealed..

$41.00 $81.00