• SAE AMS6477B

SAE AMS6477B

  • Steel Bars, Forgings, and Tubing, 0.80Cr (0.90 - 1.03C), For Bearing Applications
  • standard by SAE International, 07/13/2010
  • Category: SAE

$81.00 $41.00

This specification covers a low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

These products have been used typically for bearing component requiring a through-hardening steel usually with hardness of approximately 60 HRC and section thickness under 0.50 in. (12.7 mm), but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS1006F

SAE AS1006F

FITTING, CROSS, STANDARD AND REDUCER, FLARELESS..

$41.00 $81.00

SAE AS 1008G

SAE AS 1008G

Fitting, Elbow, 90\mD, Standard and Reducer, Bulkhead, Flareless..

$41.00 $81.00

SAE AS 1009G

SAE AS 1009G

Fitting, Tee, Standard and Reducer, Bulkhead on Side, Flareless..

$41.00 $81.00

SAE AS 1010F

SAE AS 1010F

Fitting, Elbow, 45\mD, Standard and Reducer, Bulkhead, Flareless..

$41.00 $81.00