• SAE AMS6484D

SAE AMS6484D

  • Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Normalized and Tempered
  • standard by SAE International, 07/03/2012
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft-quality, low-alloy steel in the form of bars, fogings, mechanical tubing, and forging stock.

These products have been used typically for parts, 3.5 inches (89 mm) and under in nominal thickness at time of heat treatment, requiring a through-hardening steel capable of developing a minimum hardness of 40 HRC when properly hardened and tempered and also for parts of greater thickness requiring proportionately lower hardness, but usage is not limited to such applications.

Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; SAE ARP 1110 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS7458A

SAE AS7458A

Studs, Steel, Low Alloy, Heat Resistant, Normalized and Tempered, Roll Threaded, 135 000 psi Tensile..

$41.00 $81.00

SAE J322_200907

SAE J322_200907

Nonmetallic Trim Materials--Test Method for Determining the Staining Resistance to Hydrogen Sulfide ..

$41.00 $81.00

SAE J860_200907

SAE J860_200907

Test Method for Measuring Mass (Weight) of Organic Trim Materials..

$41.00 $81.00

SAE AMS3202M

SAE AMS3202M

Butadiene Acrylonitrile (NBR) Rubber Dry Heat Resistant 55 - 65..

$41.00 $81.00