• SAE AMS6496A

SAE AMS6496A

  • Steel Bars, Forgings, and Tubing, Nitriding 1.4Cr - 1.2Mo - 0.3V (0.29 - 0.36C) Aircraft-Quality for Bearing Applications
  • standard by SAE International, 11/07/2013
  • Category: SAE

$81.00 $41.00

This specification covers a nitriding grade of aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock. These products have been used typically for nitrided parts such as bearings, operating under heavy loads and high speeds at moderate temperatures, and subject to rigid inspection standards, and requiring highest surface hardness, high core toughness, and less distortion than parts made from steel requiring quenching to case harden, but usage is not limited to such applications.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE ARP4102/5SECT1

SAE ARP4102/5SECT1

PRIMARY FLIGHT CONTROLS BY ELECTRICAL SIGNALING SECTION I..

$41.00 $81.00

SAE AMS5397D

SAE AMS5397D

Alloy Castings, Investment, Corrosion and Heat-Resistant 50Ni - 9.5Cr - 15Co - 3.0Mo - 4.8Ti - 5.5Al..

$41.00 $81.00

SAE AIR5747

SAE AIR5747

EMC Laboratory RF Radiated Emission Report for Passive Radio Frequency Identification (RFID) Tags..

$41.00 $81.00

SAE ARP603G

SAE ARP603G

Impulse Testing of Hydraulic Hose, Tubing, and Fittings Assemblies..

$41.00 $81.00