• SAE AMS6499

SAE AMS6499

  • Steel, Bars, Forgings, and Tubing, 2.7Si - 0.85Cr - 1.8Ni - 0.4Mo - 0.2V - (0.37 - 0.44C) Double Vacuum Melted
  • standard by SAE International, 07/13/2010
  • Category: SAE

$81.00 $41.00

This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

These products have been used typically for parts requiring a through-hardening steel capable of developing a minimum hardness of 53 HRC in nominal cross-sectional thickness 3.5 inches (89 mm) and under, and being capable of producing finished parts that may be required to pass stringent inspection standards, but usage is not limited to such applications.

Certain design, processing procedures, or environmental conditions may cause these products to become susceptible to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4471A

SAE AMS4471A

Cast Aluminum Alloy Composite 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (205.0/TiB2/3p-T7P) Investment ..

$41.00 $81.00

SAE AMS5518M

SAE AMS5518M

Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 ksi (1034 MPa) Tensile Stren..

$41.00 $81.00

SAE AS27198B

SAE AS27198B

SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROSILICONE RUBBER, MIL-DTL..

$41.00 $81.00

SAE AS31001B

SAE AS31001B

CONNECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING, SOLDER CONTACTS, AN TYPE..

$41.00 $81.00