• SAE AMS6905A

SAE AMS6905A

  • Titanium Alloy Bars, Forgings and Forging Stock, 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo, Duplex Annealed
  • standard by SAE International, 07/08/2011
  • Category: SAE

$81.00 $41.00

This specification covers a titanium alloy in the form of bars, forgings, and stock for forging.

These products have been used typically for parts requiring high strength and toughness and good creep resistance up to 1000 \mDF (538 \mDC), but usage is not limited to such applications.

Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; SAE ARP 982 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2424_201303

SAE J2424_201303

Free Motion Headform Impact Tests of Heavy Truck Cab Interiors..

$41.00 $81.00

SAE J2838_201303

SAE J2838_201303

Full Adaptive Forward Lighting Systems..

$41.00 $81.00

SAE J2886_201303

SAE J2886_201303

Design Review Based on Failure Modes (DRBFM)..

$41.00 $81.00

SAE J2999_201303

SAE J2999_201303

Determination of the Effective Projected Luminous Lens Area (EPLLA) by Design Analysis..

$41.00 $81.00