• SAE AMS6925A

SAE AMS6925A

  • Titanium Alloy Bars, Forgings and Forging Stock, 13V - 11Cr - 3Al, Solution Heat Treated
  • standard by SAE International, 06/23/2011
  • Category: SAE

$81.00 $41.00

This specification covers a titanium alloy in the form of bars, forgings, and stock for forging.

This material has been used typically for parts to be machined in the solution heat treated condition and subsequently precipitation heat treated, requiring high strength-to-weight ration and stability up to 550 \mDF (288 \mDC) in the precipitation heat treated condition, but usage is not limited to such applications.

Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; SAE ARP 982 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS3729A

SAE AMS3729A

Epoxy Resin Matrix, Thermosetting Moderate Temperature Resistant, Unfilled..

$41.00 $81.00

SAE AMS3705A

SAE AMS3705A

Epoxy Resin, Cycloaliphatic Liquid..

$41.00 $81.00

SAE AMS3898/2B

SAE AMS3898/2B

Interleaf Carrier Material, Composite Tape Polyethylene Film, 0.0018 inch (0.046 mm), Unperforated..

$41.00 $81.00

SAE AMS3898/3B

SAE AMS3898/3B

Interleaf Carrier Material, Composite Tape Polyethylene Coated Paper, Unperforated 0.0035 inch (0.08..

$41.00 $81.00