• SAE AMS6931B

SAE AMS6931B

  • Titanium Alloy Bars, Forgings and Forging Stock, 6.0Al - 4.0V, Annealed
  • standard by SAE International, 06/23/2011
  • Category: SAE

$81.00 $41.00

This specification covers a titanium alloy in the form of bars, forgings, and stock for forging.

These products have been used typically for parts requiring moderate strength with a maximum service temperature in the 750 to 900 \mDF (399 to 510 \mDC) range depending on time at temperature where the product is to be used in the annealed condition, but usage is not limited to such applications

Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion; SAE ARP 982 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS31061A

SAE AS31061A

CONNECTOR, PLUG, ELECTRIC, STRAIGHT, SOLDER CONTACTS, AN TYPE..

$41.00 $81.00

SAE ARP493A

SAE ARP493A

Knobs, Control Aircraft, Recommended Design..

$41.00 $81.00

SAE AMS4434M

SAE AMS4434M

Magnesium Alloy Castings, Sand 9.0Al - 2.0Zn (AZ92-T6) Solution and Precipitation Heat Treated..

$41.00 $81.00

SAE AMSA21180B

SAE AMSA21180B

Aluminum-Alloy Castings, High Strength..

$41.00 $81.00