• SAE AMS6932A

SAE AMS6932A

  • Titanium Alloy Bars, Forgings and Forging Stock, 6.0Al - 4.0V Extra Low Interstitial, Annealed
  • standard by SAE International, 06/23/2011
  • Category: SAE

$81.00 $41.00

This specification covers a titanium alloy in the form of bars, forgings, and stock for forging.

These products have been used typically for parts requiring good weldability and ductility, combined with good notch-toughness down to -320 \mDF (-196 \mDC), but usage is not limited to such applications.

Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion; SAE ARP 982 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5869C

SAE AMS5869C

Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7Cb So..

$41.00 $81.00

SAE AMS4165H

SAE AMS4165H

Aluminum Alloy, Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3511) Solution Heat Treated, Stress-Relieve..

$41.00 $81.00

SAE AMS4063E

SAE AMS4063E

Aluminum Alloy, Clad One Side, Sheet 1.25Mn - 0.12Cu (No. 11-0 Brazing Sheet) Annealed..

$41.00 $81.00

SAE AMS4164H

SAE AMS4164H

Aluminum Alloy, Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3510) Stress-Relief Stretched, Unstraighten..

$41.00 $81.00