• SAE AMS7259E

SAE AMS7259E

  • Rubber: Fluorocarbon (FKM) High Temperature/Fluid Resistant Low Compression Set/85 to 95 Hardness For Seals In Fuel Systems and
  • standard by SAE International, 05/20/2013
  • Category: SAE

$81.00 $41.00

This specification covers a fluorocarbon (FKM) rubber in the form of O-rings, O-ring cord, compression seals and molded-in-place gaskets for aeronautical and aerospace applications.

These products have been used typically as sealing rings, compression seals, O-ring cord, and molded-in-place gaskets in contact with air and a wide variety of fuels, lubricants, and specific hydraulic fluids from but usage is not limited to such application. Each application should be considered individually. This class of fluoroelastomers is not recommended for use in high temperature stabilized, "HTS", engine oils. Each "HTS" oil should be evaluated separately. This fluorocarbon rubber has a typical service temperature range of -20 to +400 \mDF (-29 to +204 \mDC) in air.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5955

SAE AMS5955

Steel, Corrosion-Resistant, Bars, Wire, and Forgings 10Cr - 12Ni - 2Mo – 1.45Al – 1.15Ti Vacuum ..

$41.00 $81.00

SAE J1803_201301

SAE J1803_201301

Seat Belt Restraint System Hardware - Glossary of Terms..

$41.00 $81.00

SAE AS932B

SAE AS932B

FITTING, ADAPTER, REDUCER/EXPANDER, FLARELESS TO BOSS..

$41.00 $81.00

SAE AS95

SAE AS95

FITTING ASSEMBLY, CROSS, REDUCER AND NONREDUCER, INTERNAL FLARE ON ONE END, TO FLARED TUBE..

$41.00 $81.00