• SAE AMS7270L

SAE AMS7270L

  • Rings, Sealings, Butadiene-Acrylonitrile (NBR) Rubber Fuel Resistant 65 ¿¿¿ 75
  • standard by SAE International, 05/17/2010
  • Category: SAE

$81.00 $41.00

This specification covers a butadiene-acrylonitrile (NBR) rubber in the form of molded rings.

These rings have been used typically for at temperatures as low as -67 \mDF (-55 \mDC) where resistance to fuel is required, but usage is not limited to such applications. The cross-section of such rings is usually not over 0.275 inch (6.98 mm) in diameter or thickness. Each application, however, should be considered individually.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4625G

SAE AMS4625G

Phosphor Bronze Bars, Rods, and Tubing 95Cu - 5Sn Hard Temper..

$41.00 $81.00

SAE AMS4862F

SAE AMS4862F

Manganese Bronze, Sand and Centrifugal Castings 63Cu - 24Zn - 6.2Al - 3.8Mn - 3.0Fe High Strength, A..

$41.00 $81.00

SAE J175_201603

SAE J175_201603

Wheels - Lateral Impact Test Procedure - Road Vehicles..

$41.00 $81.00

SAE AMS4507H

SAE AMS4507H

Copper Alloy (Brass), Sheet, Strip, and Plate 70Cu - 30Zn Half Hard (H02)..

$41.00 $81.00