SAE AMS7379
- Rubber: Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg ¿¿¿40 ¿¿F (¿¿¿40 ¿¿C) For Elastomeric Seals i
- standard by SAE International, 07/16/2008
- Category: SAE
$81.00
$41.00
This specification covers high temperature, compression set and fluid resistant fluorocarbon elastomer material to be used in the form of O-rings, compression seals, O-ring cord, and molder-in-place gaskets for aeronautical and aerospace applications.These products have resistance to a variety of gas turbine engine oils, including high thermal stability (HTS) oils, fuels, and hydraulic fluids, but usage is not limited to such applications. Each application should be considered separately. This fluorocarbon (FKM) has a service temperature range of -60 to +400 \mDF (-51 to +204 \mDC) in air.While the materials, methods, applications, and processes described or referenced in this specification may involve the use of hazardous materials, this specification does not address the hazards, which may be involved in such use. It is the sole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to take necessary precautionary measures to ensure the health and safety of all personnel involved.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
