• SAE AMSI83387B

SAE AMSI83387B

  • Inspection Process, Magnetic Rubber (Stabilized: Jan 2016)
  • standard by SAE International, 01/06/2016
  • Category: SAE

$81.00 $41.00

This specification covers both the material and the examination process of an inspection material in the form of a dispersion of magnetic particles in a controlled viscosity rubber base that cures at room temperature by addition of one or more curing agents. The test object is magnetized with the uncured rubber covering the area of interest. The magnetic particles then migrate to the leakage field caused by the discontinuity. As the rubber cures, discontinuity indications remain in place on the rubber. The product may be supplied in a variety of viscosities and colors.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4116H

SAE AMS4116H

Aluminum Alloy, Bars, Rods, and Wire, 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T4), Cold Finished, Sol..

$41.00 $81.00

SAE AMS3625C

SAE AMS3625C

Elastomeric Tubing, Electrical Insulation, Crosslinked Silicone, Pigmented, Flexible, Heat-Shrinkabl..

$41.00 $81.00

SAE AMS3690C

SAE AMS3690C

Adhesive Compound, Epoxy Room Temperature Curing..

$41.00 $81.00

SAE AMS3755C

SAE AMS3755C

Powder, Fumed Silicon Dioxide..

$41.00 $81.00