• SAE ARP1834B

SAE ARP1834B

  • Fault/Failure Analysis For Digital Systems and Equipment (Stabilized: Feb 2018)
  • standard by SAE International, 02/14/2018
  • Category: SAE

$81.00 $41.00

ARP1834 provides general guidance for the selection, approach to, and performance of various kinds of F/FA of digital systems and equipment. Its prime objective is to present several industry-acceptable, cost-effective methods for identifying, analyzing, and documenting digital-equipment failure modes and their effects. The analysis techniques and considerations presented here are directed to digital-equipment hardware faults and failures exclusively.

ARP1834 is not intended as an exhaustive treatment of the enormously complex process involved in the analytical failure evaluation of complete digital systems, nor as a universally applicable, definitive listing of the necessary and sufficient steps and actions for such evaluation.

ARP4761 provides updated methods and processes for use on civil aircraft safety assessment. When analyzing these types of systems, ARP4761 should be used in lieu of this ARP.

ARP1834 addresses the following areas of consideration in the preparation and performance of F/FA's for digital equipment:

  1. Possible Analysis Approaches: Top-Down and/or Bottom-Up (Section 3)

  2. Fault/Failure Modes, as they affect equipment operation and performance (Section 4)

  3. Fault Monitoring Methodology: Reasons for, types of, and effectiveness (Section 5)

  4. Analysis Methods: Preparation for, types of, effectiveness and coverage (Section 6)

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2859_201209

SAE J2859_201209

Hybrid III Large Male Drawing Package..

$41.00 $81.00

SAE ARP5448/9A

SAE ARP5448/9A

Plain Bearing Lined Inside Diameter Plug Gaging..

$41.00 $81.00

SAE AMS6323L

SAE AMS6323L

Steel, Mechanical Tubing 0.50Cr - 0.55Ni - 0.25Mo (0.38 – 0.43C) (SAE 8740)..

$41.00 $81.00

SAE AS5259/3A

SAE AS5259/3A

CRIMPING TOOL AND ACCESSORIES, HAND OPERATED, DIE TYPE, WIRE SIZES 8 TO 00 UN-INSULATED AND INSULATE..

$41.00 $81.00