• SAE ARP5149A

SAE ARP5149A

  • Training Program Guidelines for Deicing/Anti-Icing of Aircraft on Ground
  • standard by SAE International, 05/03/2010
  • Category: SAE

$81.00 $41.00

This document establishes the minimum criteria for effective training of air carrier and contractor personnel to deice/anti-ice aircraft to ensure the safe operation of aircraft during ground icing conditions. Appendix D specifies requirements for particular airplane models.

Agreements and Contracts: This information is recommended as a basis for maintenance and service support agreements.

Safety - Hazardous Materials: While the materials, methods, applications, and processes described or referenced in this specification may involve the use of hazardous materials, this specification does not address the hazards which may be involved in such use. It is the sole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and processes and to take necessary precautionary measures to ensure the health and safety of all personnel involved.

All guidelines referred to herein are applicable only in conjunction with the referenced SAE specifications. Specific requirements for airplane model type are included as examples in Appendix D. Due to aerodynamic and other concerns application of deicing/anti-icing fluids shall be carried out in compliance with engine and aircraft manufacturers' requirements.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4411A

SAE AMS4411A

Aluminum Alloy Plate (7081-T7651), 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr, Solution Heat Treated, Stress Rel..

$41.00 $81.00

SAE AS22520/48

SAE AS22520/48

Crimp Tools, Type 1, Hand or Power, Actuated, Wire Termination, Hydraulic Tool, for Wire Barrel Size..

$41.00 $81.00

SAE J2227_201905

SAE J2227_201905

International Tests and Specifications for Automotive Engine Oils..

$41.00 $81.00

SAE J356_201905

SAE J356_201905

Welded, Flash-Controlled, Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, Beading, F..

$41.00 $81.00