These guidelines have been written to provide process information regarding the hot stamp method of marking wire identification directly on aerospace wires and cables.This document is not intended to encourage the use of hot stamp marking or to endorse the related process. This method of marking wire identification is prohibited on any aerospace vehicle wiring that is required to conform to the provisions of AS 50881. Methods which do not deform wire or cable insulation, such as Ink Jet, Dot Matrix or UV Laser marking are encouraged as a means of minimizing the possibility of insulation damage, particularly on insulation constructions of less than 0.010 in wall thickness. AIR 5575 provides a comprehensive report on the issue of wire damage that can occur when hot stamp wire marking process is employed.In recognition that the present use of hot stamp wire marking is widespread and may continue for an extended period, the guidelines provided in this document are intended to provide process control information necessary to minimize the possibility of insulation damage.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.