• SAE ARP5911A

SAE ARP5911A

  • Regional Aircraft Towbarless Tow Vehicle - Test Requirements
  • standard by SAE International, 05/08/2017
  • Category: SAE

$81.00 $41.00

The present Aerospace Recommended Practice specifies for airplane operator and tow vehicle manufacturers the basic testing requirements for towbarless tow vehicles to be used on the nose gear of conventional tricycle type landing gears of commercial civil transport aircraft with maximum ramp weight between 8600 kg (19 000 lb) and 50 000 kg (110 000 lb), commonly designated as "regional aircraft".

Its purpose is to achieve testing results, or equivalent computer modeling, demonstrating that the loads induced by the tow vehicle will not exceed the design loads of the airplane's nose landing gear and associated structure, reduce the certified safe life limit of the nose landing gear, or otherwise compromise the airplane's structural integrity and airworthiness certification.

This document is intended to be applicable to all towbarless tow vehicles to be used for push-back and maintenance towing of commercial airplanes in the specified range. See Section 3 hereafter. It is not intended to apply to tow vehicles used for airplane operational (dispatch) towing.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS 7479B

SAE AS 7479B

Bolts and Screws, Steel, UNS S66286 1650 \mDF Solution Heat Treated Precipitation Heat Treated Befor..

$41.00 $81.00

SAE J971_200808

SAE J971_200808

Brake Power Rating Test Code--Commercial Vehicle Inertia Dynamometer..

$41.00 $81.00

SAE J1939/15_200808

SAE J1939/15_200808

Reduced Physical Layer, 250K bits/sec, UN-Shielded Twisted Pair (UTP)..

$41.00 $81.00

SAE J2475_200808

SAE J2475_200808

Wheel End Assembly and Axle Spindle Interface Dimensions--Truck and Bus..

$41.00 $81.00