• SAE ARP5987

SAE ARP5987

  • A Process for Utilizing Aerospace Propulsion Health Management Systems for Maintenance Credit
  • standard by SAE International, 12/06/2018
  • Category: SAE

$81.00 $41.00

The process detailed within this document is generic and can be applied to commercial and military applications. It applies to the entire end-to-end health management system throughout its lifecycle, covering on-board and on-ground elements. The practical application of this standardized process is detailed in the form of a checklist.

The on-board element described here are the source of the data acquisition used for off-board analysis. The on-board aspects relating to safety of flight, pilot notification, etc., are addressed by the other SAE Committees standards and documents.

This document does not prescribe hardware or software assurance levels, nor does it answer the question ???how much mitigation and evidence are enough???. The criticality level and mitigation method will be determined between the ???Applicant??? and the regulator.

In order to provide some detailed guidance utilizing the process and checklist, some high-level examples of previous successful cases of Maintenance Credit applications are included. At this point, it is incumbent on the "Applicant" to explain any differences in terminology between the health management system they are seeking a credit for and the appropriate regulatory references. For example, the system name often uses interchangeable terms such as Engine Health Monitoring, Equipment Health Management, Prognostic Health Management, Powerplant Health Management, etc.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS2484B

SAE AMS2484B

Blackening Solution for Steel Touch-Up Method..

$41.00 $81.00

SAE AMS2580

SAE AMS2580

Shot Peening, Ultrasonically Activated..

$41.00 $81.00

SAE AMSQQA225/5

SAE AMSQQA225/5

Aluminum Alloy, 2017, Bar, Rod, and Wire Rolled, Drawn, or Cold Finished..

$41.00 $81.00

SAE AMS4179C

SAE AMS4179C

Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T7452) Solution Heat Treated, Stress Re..

$41.00 $81.00