• SAE ARP6068

SAE ARP6068

  • Gas Turbine Engine Test Facility Vibration Measurement
  • standard by SAE International, 02/09/2017
  • Category: SAE

$81.00 $41.00

The test procedure per the applicable Engine Manual does require a vibration check for the low/intermediate and high speed rotor systems. Release of an engine with high vibrations can result in: On-wing vibration complaints, with subsequent troubleshooting; Rotorsystem failures; Premature engine removals

Limits are provided for transient conditions and steady state data points. Troubleshooting recommendations are limited to verification of the proper signal input and tracking. This practice provides recommendations for: Correct cable and transmitter installation and connections; Calibration; Recorded data interpretation and data analysis
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4942G

SAE AMS4942G

Titanium Tubing, Seamless Annealed, 40.0 ksi (275 MPa) Yield Strength..

$41.00 $81.00

SAE AMS5340E

SAE AMS5340E

Steel, Corrosion Resistant, Investment Castings 14Cr - 4.25Ni - 2.25Mo - 0.25Cb - 3.25Cu Homogenizat..

$41.00 $81.00

SAE AMS5395D

SAE AMS5395D

Alloy Iron Castings, Ductile, Sand, Corrosion Resistant 22Ni (2.5 - 3.0C) As Cast (Stabilized: Mar 2..

$41.00 $81.00

SAE AMS5631F

SAE AMS5631F

Steel, Corrosion-Resistant, Bars and Forgings 17Cr (0.60 - 0.75C) (440A)..

$41.00 $81.00