• SAE ARP6078

SAE ARP6078

  • Aircraft Fuel Tank Inerting Systems
  • standard by SAE International, 10/03/2012
  • Category: SAE

$81.00 $41.00

The Aerospace Recommended Practices of this document are intended for nitrogen-based Flammability Reduction Means (FRM) implemented on transport category, turbine powered airplanes. The recommended practices herein, therefore, relate only to the transport category aircraft, and focus specifically on contemporary inerting systems equipment. Such systems are referred to a Fuel Tank Inerting Systems (FTIS) in this document. This document does not cover the following: Military aircraft applications; Air separation technologies other than hollow fiber membrane (HFM) and pressure swing adsorption (PSA); Inerting of conventional unheated wing tanks or aircraft dry bays; Expected future technology solutions for the generation of inert gas.

The advice contained in this document is aimed towards providing aircraft manufacturers with guidance on the key issues associated with contemporary aircraft fuel tank inerting systems to supplement the guidance in FAA Advisory Circular AC 25.981-2. This document also provides system and component designers and manufacturers with advice on what aspects must be evaluated and addressed when designing a safe, low risk solution for transport aircraft fuel tank Flammability Reduction Means. As such, the information herein is intended as a guide for some system design aspects, but primarily identifies the issues which must be addressed in designing an inerting system for fuel tank flammability reduction.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS3376B

SAE AMS3376B

Sealing Compound, Non-Curing, Fluorosilicone Groove Injection Temperature and Fuel Resistant..

$41.00 $81.00

SAE AMS4004D

SAE AMS4004D

Aluminum Alloy, Foil, 2.5Mg - 0.25Cr (5052-H191), Strain Hardened..

$41.00 $81.00

SAE AMS4077G

SAE AMS4077G

Aluminum Alloy Sheet and Plate, Alclad One Side, 4.4Cu - 1.5Mg - 0.60Mn (Clad One Side 2024-0), Anne..

$41.00 $81.00

SAE AMS4079G

SAE AMS4079G

Aluminum Alloy, Drawn, Round, Seamless, Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Close Toler..

$41.00 $81.00