• SAE ARP900B

SAE ARP900B

  • Methods for Evaluating Cryogenic Filters
  • standard by SAE International, 12/19/2011
  • Category: SAE

$81.00 $41.00

The purpose of this test procedure is to present test methods that can be utilized to evaluate the filtration and operating characteristics of filters that will be utilized in a cryogenic system. The methods presented herein are intended to supplement standard filter testing specifications to allow evaluation of filter performance characteristics in areas that could be affected by extreme low temperatures. The test methods can be utilized to evaluate filters up to and including 60 gpm (230 L/min) capacity. If higher flow rate filters are to be evaluated in accordance with the test methods presented herein, it will be necessary to increase the system flow capacity and the size of effluent sampling system from those recommended in this document.

The test methods presented herein do not encompass testing of cryogenic bypass relief valves, differential pressure indicators, gages, or components other than a basic filter housing and element.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS3166

SAE AS3166

UNION, TUBE - CRES AMS 5646, CONICAL END, CONNECTOR..

$41.00 $81.00

SAE AS4807C

SAE AS4807C

FITTING ASSEMBLY, ELBOW, 90°, BEAM SEAL, RETAINED NUT..

$41.00 $81.00

SAE AS4678C

SAE AS4678C

NUT, BULKHEAD SHORT FLARELESS..

$41.00 $81.00

SAE AS4684C

SAE AS4684C

FITTING ASSEMBLY, ELBOW, 45°, FLARELESS AND SHORT FLARELESS, REDUCER, RETAINED NUT..

$41.00 $81.00