SAE AS 8860
- Landing Gear Structural Requirements as Listed in the MIL-886X Series of Specifications ( Reaffirmed: May 2012 )
- standard by SAE International, 05/03/2012
- Category: SAE
$81.00
$41.00
This specification contains landing gear strength and rigidity requirements, which, in combination with other applicable specifications, define the structural design, analysis, test, and data requirements for fixed wing piloted airplanes. These requirements include, but are not limited to the following.a. General Specifications; 1. The shock-absorption characteristics and strength of landing-gear units and the strength and rigidity of their control systems and of their carry-through structures. Requirements for wheels, tires, and brakes as they affect air vehicle ground loads are also included. 2. The strength of structures integral with the airplane provided for transmitting catapulting forces to the airplanes, and for engaging shipboard and shore-based arresting gear, and barricades. 3. The strength of anchor-line clamps, and the airplane strength for hoisting, jacking, towing, tie-down, and other ground- or deck-handling conditions. 4. Structural design, analysis, and test data. 5. Laboratory and flight tests performed to obtain information regarding strength rigidity and loads. 6. Definitions.b. Landing and Ground Handling Loads; c. Ground Loads for Navy Acquired Airplanes; d. Miscellaneous Loads e. Reliability Requirements, Repeated Loads, Fatigue and Damage Tolerance
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
