• SAE AS1814D

SAE AS1814D

  • Terminology for Titanium Microstructures
  • standard by SAE International, 02/24/2016
  • Category: SAE

$81.00 $41.00

This list of terms, with accompanying photomicrographs where appropriate, is intended as a guide for use in the preparation of material specifications.

The terms and photomicrographs are intended to present definitions only; they do not define either acceptance limits or minimum standards of quality.

Listings are not grouped by specific alloys or conditions and represent the typical microstructures wherever they occur.

Etchants used for the microstructures shown are stated. Where "Krolls" is stated, the composition is 10 ml HF, 30 ml HNO3, and 50 ml water (H2O).

Other common etchants are listed in ASTM E407, Microetching Metals and Alloys.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS9286B

SAE AS9286B

BOLT, MACHINE - HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3750-24 UNJF-3A..

$41.00 $81.00

SAE AS9292B

SAE AS9292B

SCREW, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN,..

$41.00 $81.00

SAE AS9294B

SAE AS9294B

BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, ..

$41.00 $81.00

SAE AS9296B

SAE AS9296B

BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, ..

$41.00 $81.00