• SAE AS194B

SAE AS194B

  • Nomenclature - Engine Cooling Fan (Stabilized: Aug 2014)
  • standard by SAE International, 08/12/2014
  • Category: SAE

$81.00 $41.00

This Aerospace Standard (AS) covers the requirements for polytetrafluoroethylene (PTFE) hose assemblies for use in aerospace hydraulic fuel, and lubricating oil systems at temperatures between -67 degrees F and 450 degrees F for Class I assemblies, -67 degrees F and 275 degrees F for Class II assemblies, and at nominal pressures up to 1500 psi. The hose assemblies are also suitable for use within the same temperature and pressure limitations in aerospace pneumatic systems where some gaseous diffusion through the wall of the PTFE liner can be tolerated. The use of these hose assemblies in pneumatic storage systems is not recommended. In addition, installations in which the limits specified herein are exceeded, or in which the application is not covered specifically by this standard, for example oxygen, shall be subject to the approval of the purchaser.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2878_201606

SAE J2878_201606

Low Speed Thorax Impact Test Procedure for the HIII5F Dummy..

$41.00 $81.00

SAE J304_201606

SAE J304_201606

Engine Oil Tests..

$41.00 $81.00

SAE EIA511

SAE EIA511

Manufacturing Message Specification Service Definition and Protocol (Stabilized: Jun 2016)..

$41.00 $81.00

SAE AMSA8576A

SAE AMSA8576A

Adhesive, Acrylic Base, for Acrylic Plastic (Stabilized: Jun 2016)..

$41.00 $81.00