• SAE AS4296

SAE AS4296

  • Drawing Interpretation and Standard Machining Practices, Couplings, Fittings and Hose Ends, Fluid Systems
  • standard by SAE International, 08/15/2013
  • Category: SAE

$81.00 $41.00

This SAE Aerospace Standard (AS) provides general information for the interpretation and clarification of engineering drawing requirements relating to the manufacture and inspection of fluid system couplings, tube fittings, and hose ends. Because it is impractical to define every minute detail of the part on the face of the drawing, this standard describes interpretations of dimensioning of general machining features and otherwise undefined tolerances that fall under the heading of “good shop practice”. This standard is supplemental to ASME Y14.5M-1994 and explains, defines and interprets drawing terms or practices that are not addressed by, ASME Y14.5M-1994. Unless otherwise specified in this standard, drawing interpretations contained in ASME Y14.5M-1994 shall apply.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS6456E

SAE AMS6456E

Steel, Welding Wire 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (SAE 4340 Mod) Vacuum Melted, Environment..

$41.00 $81.00

SAE AS4200B

SAE AS4200B

FITTING ASSEMBLY, ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 8000 PSI..

$41.00 $81.00

SAE J1772_201710

SAE J1772_201710

SAE Electric Vehicle and Plug in Hybrid Electric Vehicle Conductive Charge Coupler..

$41.00 $81.00

SAE J1939/5_201710

SAE J1939/5_201710

Marine Stern Drive and Inboard Spark-Ignition Engine On-Board Diagnostics Implementation Guide..

$41.00 $81.00