• SAE AS4720

SAE AS4720

  • Batch Qualification Procedure for Tensile Strength, Elongation and Specific Gravity of Polytetrafluoroethylene (PTFE) Resins, Vi
  • standard by SAE International, 09/05/2007
  • Category: SAE

$81.00 $41.00

This SAE Aerospace Standard (AS) covers batch qualification procedure for virgin and compounded polytetrafluoroethylene (PTFE) resins used for compression molding. AS9100 requires virgin and modified PTFE as a testing material be representative of production PTFE and/or parts. The testing specified herein is limited to tensile strength, elongation and specific gravity. Any other tests required by the purchaser must be specified separately.

NOTE 1 Isostatic molding is regarded as compression molding. The test billet and test methods described in this standard may be used for qualification of resins and compounds for material that is isostatically molded in production provided the pressure molding and sinter cycles are representative of production. Where mold tooling described in this specification is not available, it is permissible to use the production process to produce material for qualification testing.

NOTE 2 Extrusion is not considered as compression molding and is not covered by this standard.

While the materials, methods, applications, and processes described or referenced in this standard may involve the use of hazardous materials, this standard does not address the hazards which may be involved in such use. It is the sole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to take necessary precautionary measures to ensure the health and safety of all personnel involved.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMSDTL23053/8A

SAE AMSDTL23053/8A

Insulation Sleeving, Electrical, Heat Shrinkable, Polyvinylidene Fluoride, Semi-Rigid, Crosslinked..

$41.00 $81.00

SAE J198_201210

SAE J198_201210

Windshield Wiper Systems - Trucks, Buses, and Multipurpose Vehicles..

$41.00 $81.00

SAE AMS5932B

SAE AMS5932B

Steel, Corrosion and Heat-Resistant, Bars, Forgings and Tubing 14.5Cr - 2.3Ni - 12.5Co - 4.0Mo - 0.6..

$41.00 $81.00

SAE AMS5914A

SAE AMS5914A

Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Foil 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0..

$41.00 $81.00