• SAE AS4832

SAE AS4832

  • Gland Design: Nominal 3/8 in Cross Section for Custom Compression Type Seals
  • standard by SAE International, 06/29/2012
  • Category: SAE

$81.00 $41.00

This SAE Aerospace Standard (AS) offers gland details for a 0.364 cross section gland (nominal 3/8 in) with proposed gland lengths for compression type seals with two backup rings over a range of 8 to 20 in diameter.

A dash number system is proposed similar to AS568. A 600 series has been chosen as a logical extension of AS568A and the 625 number has been arbitrarily chosen for the initial number. (Both 300 and 400 series begin with 325 and 425 sizes.)

Seal configurations and design are not a part of this document. This gland is for use with custom compression type seals including, but not limited to, O- rings, T-rings, D-rings, etc.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2694_200909

SAE J2694_200909

Anti-Noise Brake Pads Shims: T-pull Test..

$41.00 $81.00

SAE J2784_200909

SAE J2784_200909

FMVSS Inertia Dynamometer Test Procedure for Vehicles Below 4540 kg GVWR..

$41.00 $81.00

SAE J2856_200909

SAE J2856_200909

User's Manual for the 50 Percentile Male Hybrid III Dummy..

$41.00 $81.00

SAE J905_200909

SAE J905_200909

Fuel Filter Test Methods..

$41.00 $81.00