• SAE AS4877C

SAE AS4877C

  • Bolts and Screws, Nickel Alloy UNS N07718, Classification: 185 ksi/1200 °F, Procurement Specification
  • standard by SAE International, 03/10/2012
  • Category: SAE

$81.00 $41.00

This procurement specification covers bolts and screws made from a corrosion and heat resistant, age hardenable nickel base alloy of the type identified under the Unified Numbering System as UNS N07718. Classification: a. tensile strength at room temperature 185 ksi minimum, b. maximum test temperature of parts 1200 degrees F, c. tensile strength at 1200 degrees F 145 ksi minimum, and d. stress rupture: 100 ksi stress rupture strength at 1200 degrees F.

Primarily for use in aerospace propulsion systems as follows: a. for use up to approximately 1200 degrees F where elevated temperature tensile strength, stress-rupture strength, and resistance to relaxation are required, and b. for use up to approximately 800 degrees F where fatigue resistance and tensile strength are required.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J2592_201901

SAE J2592_201901

Carbon Steel Tubing for General Use - Understanding Nondestructive Testing for Carbon Steel Tubing..

$41.00 $81.00

SAE J2986_201901

SAE J2986_201901

Brake Pads, Lining, Disc, and Drum Wear Measurements..

$41.00 $81.00

SAE AS930F

SAE AS930F

FITTING END, STRAIGHT THREAD, PORT CONNECTION, DESIGN STANDARD..

$41.00 $81.00

SAE AMS5541H

SAE AMS5541H

Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 73Ni - 15.5Cr - 2.4Ti - 0.7Al - 7.0Fe An..

$41.00 $81.00