• SAE AS5681A

SAE AS5681A

  • Minimum Operational Performance Specification for Remote On-Ground Ice Detection Systems
  • standard by SAE International, 10/16/2012
  • Category: SAE

$81.00 $41.00

This SAE Aerospace Standard (AS)/Minimum Operational Performance Specification (MOPS) specifies the minimum performance requirements of Remote On-Ground Ice Detection Systems (ROGIDS). These systems are ground-based. They provide information that indicates whether frozen contamination is present on aircraft surfaces.

Section 1 provides information required to understand the need for the ROGIDS, ROGIDS characteristics, and tests that are defined in subsequent sections. It describes typical ROGIDS applications and operational objectives and is the basis for the performance criteria stated in Section 3 through Section 5.

Section 2 provides reference information, including related documents, abbreviations and definitions.

Section 3 contains general design requirements for the ROGIDS.

Section 4 contains the Minimum Operational Performance Requirements for the ROGIDS, which define performance in icing conditions likely to be encountered during ground operations.

Section 5 describes environmental test conditions that provide laboratory means of testing the overall performance characteristics of the ROGIDS in conditions that may be encountered in actual operations.

Section 6 describes recommended test procedures for demonstrating compliance with Sections 3 and 4.

Section 7 contains the operational evaluation requirements for verifying the performance of the ROGIDS when installed for in-service use.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4275D

SAE AMS4275D

Castings, Permanent Mold 6.2Sn - 1Cu - 1Ni Stress Relieved..

$41.00 $81.00

SAE AMS4308A

SAE AMS4308A

Aluminum Alloy, Sheet 8.6Fe - 1.8Si - 1.3V (8009-H112) Powder Metallurgy Product, Strain Hardened..

$41.00 $81.00

SAE AMS4309A

SAE AMS4309A

Aluminum Alloy Extrusions 8.6Fe - 1.8Se - 1.3V (8009-H112) Powder Metallurgy Product, Strain-Hardene..

$41.00 $81.00

SAE AMS4216B

SAE AMS4216B

Aluminum Alloy, Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.50Mn (6013-T6) Solution Heat Treated and Artificiall..

$41.00 $81.00